Installation guide
View printable PDF drawing
- Install the anchor bolts using template, with conduit, through the centre. Concrete should be to the bottom of the thread on the bolts.
- After curing, place the leveling nuts on the anchor bolts and screw to the bottom. Install washers, also.
- Use a level to adjust the nuts to the same height.
- Lower the pole onto the anchors using nylon slings, not chains.
- Install washers on the top of the baseplate.
- Install nuts and tighten them to the correct ft/lbs:
Anchor bolt torque (ft/lbs)
lub r=150 dry
| 5/8" |
x |
18" |
= |
110 |
| 3/4" |
x |
18" |
= |
200 |
| 3/4" |
x |
24" |
= |
200 |
| 7/8" |
x |
24" |
= |
320 |
| 7/8" |
x |
36" |
= |
320 |
| 1" |
x |
30" |
= |
480 |
| 1-1/8" |
x |
40" |
= |
680 |
| 1-1/4" |
x |
48" |
= |
840 |
| 1-3/8" |
x |
54" |
= |
1100 |
| 1-1/2" |
x |
60" |
= |
1400 |
- Level the pole and install the base cover.
Dynapole products