Bullhorn brackets

View printable PDF drawing

Part No.	Description	Luminaire Orientation	Bracket Size (ft² EPA/ weight lbs)
PA1	single luminaire tenon adapter	N/A	0.2 / 7
PA2	2-light	180°	1.0 / 20
PA3-180	3-light	180°	1.6 / 30
PA3-120	3-light	120°	1.3 / 34
PA4-180	4-light	180°	2.3 / 40
PA4-90	4-light	90°	1.6 / 40

1. Welding conforms to CSA and CWB W47 and W59.
   
2. Bent arms and fixture tenons are 2-3/8" O.D.
   
3. Bracket fitters (centre hub) are 3-1/16" I.D.
   
4. The maximum straight luminaire slipfit length is 4-1/2" for all bent arms.
   
5. (4) set screws and (1) through-bolt are provided on each bracket fitter used to secure bullhorn bracket to pole. It is the installer's responsibility to utilize the through-bolt by drilling a 7/16" through-hole in the pole's tenon once the proper position of the bullhorn bracket has been established.
   
6. Removable cap is supplied to cover the bracket fitter (centre hub) where required.
   
7. If bullhorn is being mounted on exisiting pole, specify the outside dimension of pole over which the bullhorn is to fit.
   
8. Standard finishes are black or bronze (brown) polyester powder, or galvanized.
   

Dynapole products